★Simple control and high reliability: high and low-level control laser start and stop; at the same time, the protection switch detects water flow.
★Cutting and engraving compatible: Power stable, adaptable, and fast response, suitable for cutting or engraving.
★The power supply itself has an open circuit protection function: it is safer to use and significantly extends the life of the power supply.
★Laser power control is simple: both the analog signal 0-5V can be used to control the laser power, or it can be controlled by digital signals.
★The power supply has a manual test button to quickly determine the fault on site.
The power supply can be equipped with a feedback interface which can be used for closed-loop control as well as for verifying the actual operating current.
Description:
HY-DY13 CO2 laser engraving and cutting machine power supply 110V compatible with RECI Z4 / W4 / S4 100-120w laser tube, also suitable for EFR, YONGLI, WEEGAINT, SP, and other lasers.
Product parameters:
– Input voltage: AC110V
– AC frequency: 47-440Hz
– Maximum input power: 550W
– Maximum input current: 8A
– Maximum output voltage: 40KV
– Maximum output current: 28mA
– Efficiency: greater than 90%
– Meantime between failures: greater than 10,000 hours
– Response speed: less than 1mS (from the time the switching signal is given until the output current rises to 90% of the set current)
– Withstand voltage: input-output, input-case: AC1500V 10mA 60S; output negative is connected to the case.
– Control interface: TTL electric evaluation switch control, the effective level can be a high or low selection
– Operating environment: working temperature (-10-40) degrees Celsius, humidity: less than 90% Cooling form: forced air cooling
The package contains:
– 1* power supply
