- ★ The pump can be used for a variety of hydraulic equipments.Punching machine, bending machine, Jack split hydraulic products.
- ★ Input voltage: AC 110V 60HZ;Oil capacity: 7L;Motor power: 750W;Motor speed: 1400r/Min;Flow rate: 0.6L/min(＞7Mpa) – 5L/min(＜7Mpa) ;Working pressure: 290PSI – 10152PSI(2Mpa – 70Mpa)
- ★ High speed high quality,stable woking.Easy to operate.Safe to use.Working mode：Pedal Solenoid valve Control.
- ★ Double-acting, solenoid valve.Manual switch and pedal switch. Strong Storage Capacity. Power Saving.
- ★ If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency.
- Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable.
- Hydraulic pump working pressure: 2Mpa to 70Mpa.
- Rotate speed:1400r/min.
- Flow rate: 0.6L/min – 5L/min.
ACCURATE PRESSURE GAUGE
- This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time.
- From 7Mpa to 70Mpa, you can try slowly and choose the right working pressure you need.
LARGE CAPACITY TANK
- With a hydraulic pump tank, 7L capacity, the hydraulic power pack is efficient. A visible window for monitoring the inside.
- The pump uses the 15 – 46 anti-wear hydraulic oil.
- It features compact size, lightweight, simple structure, and ease of use.
- Manage this double-acting hydraulic gear pump by the solenoid valve. The high-pressure oil pipe is of high quality and durability. Control two with double pipes.
- Double-acting, solenoid valve
- Manual switch and pedal switch
Input voltage: AC 110V 60HZ
Flow rate: 0.6L/min(＞7Mpa) – 5L/min(＜7Mpa)
Working pressure: 290PSI – 10152PSI(2Mpa – 70Mpa)
Oil capacity: 7L
Motor power: 750W
Motor speed: 1400r/Min
1. Open the filler before use, the electric pump and power connections before oiling, then press down the black button which next to the motor to open, press the manual operation switch (up), after a few air pressure, press the manual operation switch (down), turn off the motor, connected to tubing. (The pressure should not exceed 63Mpa when air pressure, in order to avoid damage)
2. Open the motor after the pump connect with the equipment, and placed the operation valve in pressurized position after the motor rotates 1-2 minutes, this moment the hydraulic oil come into the cylinder to perform the work, and the output of the hydraulic oil will increases with the load on their own booster until 63Mpa.
3. The oil pump regular working temperature between 10℃~50℃,when find the oil temperature≥70 ℃ should stop using after continuous working under high pressure, let it self-cooling before use.
4. The pressure of the relief valve and safety valve have been set before the pump leave the factory, the user can not arbitrarily increase the pressure,could only reduce it according to the actual working pressure, that can improve the life of the pump station.
5. The motor must have reliable grounding.
1 X Electric Driven Hydraulic Pump
2 X Oil Hose(1.8M)
2 X Quick Connector