The pump can be used for a variety of hydraulic equipment.
Punching machine, bending machine, Jack split hydraulic products.
Working mode：Pedal Solenoid valve Control.
If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency.
High-power Motor
This electric hydraulic pump uses 750W power pure copper motor with aluminum shell, saving power and effort, freeing your hands. 1400 revolutions per minute, fast speed and high work efficiency.
Large Fuel Tank
This electric hydraulic pump tank can store 7L of oil, 15 – 46 hydraulic oil. Large capacity extends working hours. Observe the hydraulic cylinder at any time through a visible window to inlet the oil in time.
Pressure Gauge
A precise pressure gauge is accurate. It is a 10000 psi hydraulic pump which is higher than most products at the market. High pressure is for driving piston and low pressure is for piston reset.
Solenoid Valve
Turn on the power. Then, control the input and output of the hydraulic oil by operating the pedal solenoid valve, electric hydraulic valve. Foot switch for hands-free remote control.
Wide Application
If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly.
Input voltage: AC 110V, 60HZ
Flow rate: 0.6L/min(＞7Mpa) – 5L/min(＜7Mpa)
Working pressure: 290PSI – 10152PSI(2Mpa – 70Mpa)
Oil capacity: 7L
Motor power: 750W
Motor speed: 1400r/Min
Machine size: 360X280X440mm(14.2”x11”x17.3”)
N.W.: 28KG
Package included:
1 X Electric Driven Hydraulic Pump
1 X Oil Hose(1.8M)
1 X Quick Connector
Operation Instruction:
1. Connect the oil pipe to the electric pump
2. Add fine hydraulic oil below 32 to the oil tank
3. Plug in the wire and power on
4. Press the pedal start button, and the motor works
5. After the work, press the pedal reset key to reset, and the motor will not work.
6. The red light of solenoid valve is on, and the operation is completed
